How To Repair Pool Tile

Download Article

Download Commodity

If your swimming pool is over 15 years old or has taken quite a bit of wear and tear, you may need to replace some of the tiles. Start by lowering your h2o level and removing any cracked or damaged tiles. Observe some replacement tiles and install them with thinset mortar, then seal them in identify with grout. Once y'all're washed and everything'southward dry, bring the pool's level back up and reward yourself with a swim!

1. 1

   Drain your pool beneath the tiles that need replacing and let the area dry out. Use a submersible pump to bleed out enough water to leave the damaged expanse exposed and dry out. Once the area is clear, turn off the pump and let the tile dry off completely. It's all-time to practice this in bright sunlight, which volition dry the tile quickly.

   • If you're simply replacing a couple tiles along a top edge, you'll only need to drain plenty water to expose the area and keep it from being splashed.
   • If you're redoing your entire puddle, drain all of the water and let it sit down for a day or two, until it's fully dry.
   • There are also special adhesives bachelor for re-attaching single tiles underwater. However, your repair will be much more effective and durable if you drain your pool start.^[1]

2. 2

   Use a grout saw to remove the grout around whatsoever cracked tiles. This tool essentially looks similar a screwdriver with a saw blade on the cease of it. Button the blade cease against the grout and saw it back and forth to cutting through the grout. Proceed cutting through until you remove all of the grout around the tiles that need to be replaced.^[2]

   Advertisement

3. iii

   Use a hammer and chisel to remove whatsoever damaged tiles. Place the tip of the chisel in the joint of the cracked tile, then tap information technology with the head of the hammer to break the tile away from the mortar. Keep borer until the whole tile comes abroad, then repeat on whatever other damaged tiles.^[3]

   • If your tiles are modest, you lot can use a small flathead screwdriver instead of a chisel.

4. four

   Inspect the beam backside the tile for any necessary repairs. Look for cracks, open seams, an uneven surface, or missing chunks in the beam. If the damage is greater than some damaged tiles, you'll need to shore up the base with hydraulic cement or a plaster mix. This is essential for ensuring the longevity of your pool too as creating a flat surface for the tile to stick to.

   • If the damage looks like it could be extensive, contact a professional total-service pool company to help diagnose and repair the trouble.

Advertising

1. 1

   Employ the quondam tiles if they're still intact. If the tiles came off but they're however in 1 slice, you can simply re-attach them! This will save you a lot of fourth dimension, instead of trying to find new tiles that fit the design or space bachelor. When the tiles autumn off, keep them together in a rubber spot where they won't become bumped, cracked, or lost.^[four]

2. ii

   Ask your original puddle architect for tile, if possible. If you know who congenital your pool and they're still available, they may still have extra tiles handy. Send them an email, including a picture show of the tile and a quick description, and ask if they accept admission to any extra tiles.^[5]

   • You'll also need to ask for a price, which may exist discounted due to your past business.

3. 3

   Cheque online or at local puddle stores for like or identical tiles. Pool stores are good for comparison colors up close, merely online puddle tile catalogues will likely give y'all the most variety to choose from. Settle for a close friction match if the repair is in a less obvious area, such as somewhere you tin't run into from the house.^[six]

   • Equally long as the color is the same and the shape and size are similar, they probably won't stand out too much!

4. 4

   Have tiles custom-made to match your original tiles exactly. This choice is more than expensive, but if y'all can't find a match for your tiles, this will give you the almost seamless repair. Consult with a custom tile company to meet if they can recreate your tile. Bring photographs of the original tile to give them a reference.

   • To find a custom tile company, wait online or locally and ready upwards a consultation.

Advertisement

1. i

   Mix upward a batch of pond pool thinset repair mortar. Follow the instructions on the packaging to mensurate and mix the mortar and water. Apply a trowel to stir the mixture in a plastic container or metal bowl. Go on adjusting the proportions as needed until the mixture reaches a spreadable, peanut butter-like consistency. Stir well to get rid of any lumps.

   • The thick, spreadable consistency volition help go along the mortar from dripping into the puddle water.
   • Some thinset mortars also come with a bonding agent, which increases the adhesive quality. Mix equal parts mortar and bonding agent, then add water until the mixture thickens to a creamy, spreadable texture.^[seven]

2. 2

   Spread a ¹⁄₈ inch (0.32 cm) layer of thinset on the back of the new tile. With your trowel, scoop up a daub of thinset and smooth it out over the unabridged back of the tile, all the fashion upwards to the edges. Line the tile up on the pool wall so it matches whatever existing pattern, and then press it firmly against the beam.^[8]

   • Thinset dries quickly, then make sure to place the tile immediately subsequently roofing the back.

3. 3

   Keep the tiles in place while they dry for 24-48 hours. Cheque on the tiles' progress every 10 minutes for one-2 hours to see if they've slipped down the pool wall. If whatsoever small-scale tiles skid, just slide them support and press them into place. For larger tiles, you should duct tape them into identify while they dry.

   • 24 hours should exist enough to dry the thinset mortar, but waiting up to 48 hours volition let it cure and harden even more.

4. 4

   Utilise waterproof tile grout to fill in the spaces between the tiles. Load up a flexible spreader with grout and push the product between the tiles. Once you've filled up the space, let the grout set for 10-fifteen minutes, then use wet your easily and gently rub at whatever excess grout smeared on the tiles.

   • To avert dropping any daubs of grout into the pool, work with small amounts at a time.
   • If the dried-on grout is stubborn, wait 24 hours and scrub the tiles with a stiff brush to smooth and remove any brume.
   • After letting the grout dry out for 24 hours, you can refill the pool and relish the product of your hard piece of work!

Advertisement

Inquire a Question

200 characters left

Include your email accost to become a bulletin when this question is answered.

Submit

Advert

Things You'll Need

• Grout saw
• Hammer
• Chisel
• Hydraulic cement or plaster mix (if the axle needs repairing)

• Thinset mortar
• Trowel
• Tiles
• Duct tape
• Waterproof grout
• Stiff brush or scrubber

Thanks for submitting a tip for review!

• Croaky puddle tiles tin sometimes indicate beam harm. Make sure to check behind the tile before replacing information technology.

• When your swimming pool tiles are cracked and damaged, they can be a prophylactic risk to swimmers, so be certain to replace them quickly.^[9]

Advertising

Well-nigh This Article

Article Summary X

To supersede pool tiles, first by draining plenty water to go out the damaged tile exposed and dry. So, use a grout saw to remove the grout around the cracked tiles. Take a hammer and place the tip of a chisel in the articulation of the cracked tile and tap information technology with the head of the hammer to break it off. Mix up a batch of mortar according to the directions on the packaging and spread a layer on the back of the new tile. Identify the new tile in place and duct record them in place while they dry. Then, apply waterproof tile grout to fill the spaces betwixt the tiles and let it set. For tips near how to use sometime tiles to replace puddle tiles, keep reading!

Did this summary help y'all?

Thanks to all authors for creating a folio that has been read 76,642 times.

Did this article assist you?

Source: https://www.wikihow.com/Replace-Pool-Tiles

Share this post